Your present location:Home >> Crystal >> NLO crystal >> KTP
        Product Search
        • keyword :
        • Category :
        Top Products
        Contact Us

        THATSHIGH Photoelectric Technology Co., Ltd.

        Add: Office Building No.1, 677 Tian-chen Road., National
           High-tech Development Zone, Jinan, China
        PC : 250100
        Tel: +86-531-88687737

        • Product Name: KTP
        • NO.: 2303


        Potassium Titanyl Phosphate (KTiOPO3 or KTP) crystals are widely used in both commercial and military lasers including laboratory and medical systems, range-finders, lidar, optical communication and industrial systems.
        THATSHIGH's KTP is featured by
        1. Large nonlinear optical coefficient
        2.Wide angular bandwidth and small walk-off angle
        3.Broad temperature and spectral bandwidth 
        4. High electro-optic coefficient and low dielectric constant
        5.Large figure of merit 
        6.Nonhydroscopic, chemically and mechanically stable
        THATSHIGH offers
        1.Strict quality control
        2.large crystal size up to 20x20x40mm3 and maximum length of 60mm;
        3.Quick delivery(2 weeks for polished only, 3 weeks for coated)
        4.Unbeatable price and quantity discount 
        5.Technical support
        6.AR-coating, mounting and re-polishing service
        Chemical and Structural Properties of KTP Crystal

        Crystal Structure

        Orthorhombic, Space group Pna21, Point group mm2.

        Lattice Parameter

        a=6.404 Å, b=10.616 Å, c=12.814 Å

        Melting Point  

        ~1172 °C

        Mohs Hardness  



        3.01 g·cm-3

        Thermal Conductivity 

        13 W·m-1·K-1

        Thermal Expansion Coefficient

        αx=11×10-6/K, αy=9×10-6/K, αz=0.6×10-6/K

        Optical and Nonlinear Optical Properties of KTP Crystal

        Transparency Range

        350 nm ~ 4500 nm

        Thermo-optic Coefficient [K-1](@1064nm)

        dnx/dT=6.1×10-6  dny/dT=8.3×10-6   dnz/dT=14.5×10-6

        Absorption  Coefficient

        <0.1% cm-1 @1064nm    <1% cm-1 @532nm

        For Type II SHG of
        a Nd:YAG laser @1064nm

        Temperature Acceptance: 24 °C·cm-1
        Spectral Acceptance: 0.56 nm·cm-1
        Angular Acceptance: 14.2 mrad·cm-1 (φ);  55.3mrad·cm-1 (θ)
        Walk-off Angle: 0.55°

        NLO Coefficients

        deff(II)≈(d24-d15)sin2φsin2θ-(d15sin2φ + d24cos2φ)sinθ

        Non-vanished NLO Susceptibilities [pm/V]

        d31=6.5  d24=7.6  d32=5 pm/V   d15=6.1  d33=13.7

        Sellmeier  Equations
        (λ in μm)   

        ny2=3.0333+0.04154/(λ 2-0.04547)-0.01408λ2
        nz2=3.3134+0.05694/(λ 2-0.05658)-0.01682λ2

        Applications for SHG and SFG of Nd: lasers
         KTP is the most commonly used material for frequency doubling of Nd:YAG and other Nd-doped lasers, particularly when the power density is at a low or medium level. To date, extra- and intra-cavity frequency doubled Nd:lasers using KTP have become a preferred pumping source for visible dye lasers and tunable Ti:Sapphire lasers as well as their amplifiers. They are also useful green sources for many research and industry applications. 
        * More than 80% conversion efficiency and 700mJ green laser were obtained with a 900mJ injection-seeded Q-switch Nd:YAG lasers by using extra-cavity KTP.
        * 8W green laser was generated from a 15W LD pumped Nd:YVO4 with intra-cavity KTP.
        * 200mW green outputs are generated from 1 W LD pumped Nd:YVO4 lasers by using THATSHIGH's 2x2x5mm KTP and 3x3x1mm Nd:YVO4.
        * 2-5mw green outputs are generated from 180mw LD pumped Nd:YVO4 and KTP glued  crystals. For more details, please refer to Glued Crystals.
        KTP is also being used for intracavity mixing of 0.81μm diode and 1.064μm Nd:YAG laser to generate blue light and intracavity SHG of Nd:YAG or Nd:YAP lasers at 1.3μm to produce red light.
        Applications for OPG, OPA and OPO
        As an efficient OPO crystal pumped by a Nd:laser and its second harmonics, KTP plays an important role for parametric sources for tunable outputs from visible (600nm) to mid-IR (4500nm), as shown in Fig. 3 and Fig. 4.
        Generally, KTP's OPOs provide stable and continuous pulse outputs (signal and idler) in fs, with 108 Hz repetition rate and a mW average power level. A KTP’s OPO that are pumped by a 1064nm Nd:YAG laser has generated as high as above 66% efficiency for degenerately converting to 2120nm.
        The novel developed application is the non-critical phase-matched(NCPM) KTP OPO/OPA pumped by the X-cut KTP crystal. As shown in Fig.5, for pumping wavelength range from 0.7μm to 1 μm, the output can cover from 1.04μm to 1.45μm(signal) and from 2.15μm to 3.2μm(idler). More than 45% conversion efficiency was obtained with narrow output bandwidth and good beam quality.

        THATSHIGH KTP Crystal Coating Service
        □ Dual Band AR-coating (DBAR) for SHG of 1064nm with following features:
               ● Low reflectance (R<0.15% @ 1064nm; R<0.5% @ 532nm)
                ● High damage threshold (>400MW/cm2 @ 1064nm & 532nm)
                ● Long durability
        □ Broad band coating for OPO applications.
        □ High reflectivity coating: HR @ 1064nm (R>99.8%) & HT @ 532nm (T>95%)
        □ Other coating types are available upon request.

        THATSHIGH Specifications for KTP Crystal

        Dimension Tolerance

        (W±0.1mm) ×(H±0.1mm) ×(L+0.5/-0.1mm) (L≥2.5mm) 
        (W±0.1mm) ×(H±0.1mm) ×(L+0.1/-0.1mm) (L<2.5mm)

        Angle Tolerance

        Δθ ≤ 0.25°  Δφ ≤ 0.25°

        Clear Aperture

        90% of central area


        ≤ 0.2mm @45°


        ≤ 0.1mm

        Damage Threshold
        [GW/cm2 ]

        > 0.5 for 1064nm, TEM00, 10ns, 10Hz (AR-coated)
        > 0.3 for 532nm, TEM00, 10ns, 10Hz (AR-coated)


        < λ/8 @ 633nm


        < 20"


        ≤ 5'

        Surface Quality [S/D]

        < 10/5

        Wavefront Distortion

        < λ/8 @ 633nm


        AR coating available upon request

        Interior Quality

        No visible scattering paths or centers [inspected by 50mW green laser]

        Key words :

        Goods No. Goods name Pre-ordered quantity Expected unit price Operation
        2303 KTP Delete

        Enter inquiry description

        Inquiry description:
        * Within 500 characters
        Inquirer's name:
        Inquirer's gender:
          Male Female
        Inquirer's email address:
            Whether you receive email reminder
        Inquirer's telephone number:
        Inquirer's cellphone number:
            Whether you receive SMS reminder
        Inquirer's fax number:
        Inquirer's address:
        Inquirer's post code:
        Verification code:
            Continue inquiry